I don’t know much about cables so if type something wrong forgive me …

I was wondering around with some old stuff, and found this cable that is usb to usb “as shown in the image below”

https://m.media-amazon.com/images/I/71hHpyqvvnS._AC_UF1000,1000_QL80_FMwebp_.jpg

Now what i thought was that it might be used to connect 2 computers with each other so i tried that and connected 2 computers with each other using it and nothing happened Can anyone tell me what this cable is even used for ???

  • ArbitraryValue@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    1 year ago

    Why would it kill the port? I think the power lines would be at equal voltages on both ends and the data lines just wouldn’t do anything.

    • u/lukmly013 💾 (lemmy.sdf.org)@lemmy.sdf.org
      link
      fedilink
      arrow-up
      2
      arrow-down
      2
      ·
      1 year ago

      Not exactly equal. One will try to feed to another which can kill it. It’s not made to be connected like this. Maybe they could even fight if it tries to compensate by increasing voltage.

      But hopefully there’s some protection that disables the USB port before something ugly happens.

      • safesyrup@feddit.ch
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        This is entirely dependent on how the circuitry is set up. However USB voltage is always 5 volts and the controller doesn‘t go over that.