I’m trying to better understand hosting a Lemmy Instance. Lurking discussions it seems like some people are hosting from the Cloud or VPS. My understanding is that it’s better to futureproof by running your own home server so that you have the data and the top most control of hardware, software etc. My understanding is that by hosting an instance via Cloud or VPS you are offloading the data / information to a 3rd party.
Are people actually running their own actual self-hosted servers from home? Do you have any recommended guides on running a Lemmy Instance?
Me, yes. But it’s still selfhosting if you do it on a VPS. And probably easier, too. I mainly do it at home, because I can have multiple large harddisks this way. And storage is kind of expensive in the cloud.
Depending on where you are, a hard drive that runs 24/7 can cost you quite a bit of money (6$/month or even more for just the hard drive). If you consider the upfront cost of a hard drive, the benefit of hosting at home gets even smaller. Nvme is where you really save money hosting at home. Personally I do both, because cloud is cheap and you can have crazy bandwiths.
I know. You pretty much need to know what you’re doing. And do the maths. Know the reliability (MTBF/MTTF) and price. Don’t forget to multiply it by two (as I forgot) because you want backups. And factor in cost of operation. And corresponding hardware you need to run to operate those hdds. My hdd spins down after 5 minutes. I live in Europe and really get to pay for electricity as a consumer. A data center pays way less. My main data, mail, calendar and contacts, OS, databases and everything that needs to be there 24/7 fits on a 1TB solid state disk that doesn’t need much energy while idle. So the hdd is mostly spun down.
Nonetheless, I have a 10TB hdd in the basement. I think it was a bit less than 300€ back when I bought it a few years ago. But I can be mistaken. I pay about 0.34€/kWh for (green) electricity. But the server only uses less than 20W on average. That makes it about 4€ per month in electricity for me. And I think my homeserver cost me about 1000€ and I’ve had it since 2017. So that would be another ~15€ per month if I say I buy hardware for ~1100€ every 6 years. Let’s say I pay about 20€/month for the whole thing. I’m not going to factor in the internet connection, because I need that anyways. (And I probably forgot to factor in I upgraded the SSD 2 times and bought additional RAM when it got super cheap.)
I also have a cheap VPS and they’d want 76,27€/month … 915.24€ per year if I was to buy 10TB of storage from them. (But I think there are cheaper providers out there.) That would have me protected against hard disk failures. It’ll probably get cheaper with time, I can scale that effortlessly and the harddisks are spun up 24/7. The harddisks are faster ones and their internet connection is also way faster. And I can’t make mistakes like with my own hardware. Maybe having a hdd fail early or buy hardware that needs excessive power. And that’d ruin my calculation… In my case… I’m going with my ~20€/month. And I hope I did the maths correctly. Best bang for the buck is probably: Dont have the data 24/7 available and just buy an external 10TB hard drive if your concern is just pirating movies. Plug it in via USB into whatever device you’re using. And make sure to have backups ;) And if you don’t need vast amounts of space, and want to host a proper service for other people: just pay for a VPS somewhere.
You forgot something in your calculations, you don’t need a complete VPS for the *arrs. App hosting/seedboxes are enough for that and you can have them for very, very cheap.
Ahem, I don’t need a seedbox at all. I use my VPS to host Jitsi-Meet, PeerTube and a few experiments. The *arrs are for the people over at !piracy@lemmy.dbzer0.com
That you probably need a VPS for, yes.