An ice fishing box to house my ic-7000, an atu, a battery pack. Very crude but solid rack made of pine board I had laying around. This is cobbling of the best sort.

  • Eheran@lemmy.world
    link
    fedilink
    arrow-up
    1
    arrow-down
    1
    ·
    1 year ago

    How much power does such a radio need? At what voltage (or just I and U)?

    Ever since USB-C powerbanks with up to 20 V from PD are a thing, I use them for as much as possible.

    • AG7LR@lemmy.radio
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      How much RFI do those power banks spew out?

      USB PD only goes up to 3A at 15V. That’s not enough current to run a mobile radio.
      A small LiFePO4 battery is a much better choice as it will supply a stable 12.8V without any switch mode supplies.

      • Eheran@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        I agree. Never measured the RFI since it usually replaces a cheap switchmode power supply from mains, so can only get better.

        • AG7LR@lemmy.radio
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Most radios won’t run on 20V or higher. At 15V or lower, USB PD is limited to 3A.

          If you wanted to get 100 watts, you would need a buck converter to step 20V down to 13.8V. Now you have two switch mode power supplies producing RFI.

    • Inductor@feddit.de
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Voltage is generally standardised to 13.8 V (don’t ask me why).

      I don’t know what exact radio that is, but it looks like it can probably transmit at 50 W.

      • Eheran@lemmy.world
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        1 year ago

        Ah makes sense: alternator voltage of a car. I assume it works essentially just as well on 12 V, but USB PD, as of today, can not do 100 W or ~9 A at 12 V.

        • Jason - VE3MAL@lemmy.radio
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Amateur radios are generally spec’d at 13.8v plus or minus either 10% or 15% so that they work on a non-running car (12.something volts) or if an alternator is running a bit hot. A 100W radio like this is pretty much always going to require around 20amps at full power -but they have adjustable transmit power. They don’t transmit as well at the lower voltage range, but most people don’t worry about it.