Work are chucking out a “Cisco 887VA-M” integrated services router.

Anyone know if I can install some custom OS/firmware via the USB on the back?

I expect this is just e-waste but maybe it has some use as emergency switch :)

  • slazer2au@lemmy.world
    link
    fedilink
    English
    arrow-up
    37
    ·
    11 months ago

    Anyone know if I can install some custom OS/firmware via the USB on the back?

    No, Cisco uses their own silicon in that unit which means things like Tomato or Wrtt(?) Won’t load onto it.

    Best you can do is take it to an ewaste or sell it to a second hand Cisco reseller for maybe €75 if you are lucky.

    • tabular@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      8
      ·
      11 months ago

      Damn. Does Cisco use their own silicon anymore or are many modern units able to run Tomato/Wrtt?

      • nbailey@lemmy.ca
        link
        fedilink
        English
        arrow-up
        4
        ·
        11 months ago

        The modern stuff uses signed bootloaders, ie secureboot. Afaik there’s no custom OS’s for C9k or Nexus gear.

    • exu@feditown.com
      link
      fedilink
      English
      arrow-up
      1
      ·
      11 months ago

      With enough time and motivation it’s probably possible, but that holds for many things.

  • EuroNutellaMan@lemmy.world
    link
    fedilink
    English
    arrow-up
    18
    ·
    11 months ago

    Rip out its flesh, destroy it in vengeance and replace it with some raspberry pi running pi-hole or turn it into a retro-gaming console

    • sunbeam60@lemmy.one
      link
      fedilink
      English
      arrow-up
      5
      ·
      edit-2
      11 months ago

      To crush your ComTech conglomerates, see them driven before you, and to hear the lamentation of their routers.

    • tabular@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      11
      arrow-down
      1
      ·
      11 months ago

      My limited understanding is Cisco stuff is very blackbox/proprietary. I’d sooner spend time learning how to hack them out of spite ;)

      • SteveTech@programming.dev
        link
        fedilink
        English
        arrow-up
        4
        ·
        11 months ago

        That’s true, but because of that you can get Cisco certifications, which could be helpful if you end up in an network related job. Those certifications will also give you a lot of knowledge of how networks work. (I’m currently completing a CCNA, and quite enjoy it)

        A few other companies also clone the Cisco CLI, so there’s that too. I wouldn’t touch the Web UI if it has one though.

        • R0cket_M00se@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          11 months ago

          Most are similar enough, Avaya is pretty close.

          Welcome to networking! It’s a trip I’ll tell you what, especially when you get a job at a place with decade old network configs and get told to upgrade it while the group that uses it fights you tooth and nail.

  • Blaster M@lemmy.world
    link
    fedilink
    English
    arrow-up
    15
    ·
    11 months ago

    It being a 100 Mbps (“Fast” Ethernet) switched router, it’s really only useful for devices that don’t need or use more than 100 Mbps network speed, so like PoE IoT devices perhaps.

    • tabular@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      11 months ago

      That’s neat, not had that before. All that comes to mind is a LAN security camera system.

      • a4ng3l@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        11 months ago

        Security cameras with a central continuous recording system + alerts and automations… plenty of fun to be had. Also wifi access points on poe depending on the interface speed. Got those 2 at home and it has been a treat so far.