• Overzeetop@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      10 months ago

      From a technical perspective, this is why a colder than average winter will affect (air-source) electric heat pumps more than resistance or fuel sourced heat. As the outside temps go down, the efficiency decreases in a heat pump, so the curve is non-linear. For electric resistance and fuels, the outdoor temperature has a near zero effect, making the increase in cost linear.

      Not that it matters too much. Electricity costs in most of the US are relatively stable whereas fuel costs can swing by a factor of five or more from year to year ($2/MMBTU to over $12/MMBTU in the last decade). Oil doesn’t play much into heating anymore, but it can also swing by more than a factor of two (From a low of $2/gal to over $5/gal in the last decade). Electric, though, is up by 25% over the last decade (on average) and varies by less than a a couple percent from year to year, slowly increasing at around a 2% average rate.

    • Uranium3006@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      10 months ago

      but your strips only need to come on when it’s very cold out. in almost all climates that’s only the very coldest days, and in some places like LA it’s never too cold

      • ratman150@sh.itjust.works
        link
        fedilink
        arrow-up
        1
        ·
        10 months ago

        That’s my point, my heat pump uses on avg 1/5th the energy of my heat strips. Comparing the two is at best disingenuous.