As stupid as it says on the tin. Can you remove hair clogs with Nair?

EDIT: I don’t actually have a drain that needs to be unclogged. This is a showerthoughtquestion.

  • ÞlubbaÐubba@lemm.ee
    link
    fedilink
    arrow-up
    0
    ·
    3 months ago

    Couldn’t you just use an acid to dissolve the hair as well as the other shit that makes up a drain clog?

    • Varyk@sh.itjust.works
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      Yup, although boiling water works like a charm just about every time.

      Usually what I use for a clog.

          • over_clox@lemmy.world
            link
            fedilink
            arrow-up
            0
            ·
            3 months ago

            That’s not just advice, that’s coming from experience. My dad did that for a while in the winter, to warm his toilet up. Yeah, after a couple months, the base of the toilet started leaking.

            I mean hey, you do you, but wax seals melt when exposed to hot water…

    • kinkles@sh.itjust.works
      link
      fedilink
      arrow-up
      0
      ·
      edit-2
      3 months ago

      Acids don’t work as well on the substances that contribute to typical household drain clogs compared to bases, which is what Drano is.

      When it enters your drain pipes, the sodium hydroxide reacts with fatty acids and proteins from your typical clogging culprits like oils, grease, soap scum, hair, and food particles.

      This reaction generates heat, breaks large molecules into smaller ones, and liquefies solid gunk. The extremely high pH enables the sodium hydroxide to saponify fatsand dissolve organic matterthrough chemical decomposition.

      Acids simply wouldn‘t have the same cleansing effects on drain clogs. Grease and oils are composed of tough-to-break-down fatty acid chains that resist acidic breakdown.

      Quoted from here.

    • pelletbucket@lemm.ee
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      your typical household drain cleaner is basic rather than acidic. acid will attack metal pipes, so if you don’t know what’s going on downstairs, I would stick with lye. and acid isn’t good for septic systems