I am an American and i own an electric kettle and use it frequently. I switched to an electric kettle after accidentally turning my microwave into a smoke bomb when I put instant ramen in there and forgot to add the water. Now I only make instant ramen with hot water from a kettle or on the stove.
We have an electric kettle, husband uses it for instant coffee; before we got together he used the microwave to boil water. The kids use it for tea. I use it for hot water for Moka pot, boiling water for grits, whatever needs hot water.
Electric kettle, microwave, and coffee grinder are the only appliances that live on the kitchen counter, all the other things are in the pantry.
I’ve heard electric kettles are slower here because of the limits of our electrical system. I do have a kettle for the stove, though. I also rarely drink tea.
Due to a quirk of unifying 2 standards, Europe and the UK, the range is 216.2 volts to 253.0 volts.
That encompasses infrastructure built to a tighter tolerance around 220V in Europe and infrastructure built to a tighter tolerance around 240V in the UK (and Australia).
We expect 3150W out of a kettle most of the time. Our heaters will say 3kW.
Usually you’ll find a few volts over 240 out of our outlets and that’s to design spec.
That’s true, because you use a 110V based system you have less power available to the kettle. It’s still a lot faster than an electric stove though. Not faster than an induction stove, probably.
Residential service is a single split 240v phase off of a 480V 3-phase line, while something like an apartment is 2 phase 208Y, with a single phase is 120V.
My friends just put a euro style 220 outlet on their counter and ordered a kettle online. Since they were building the house new it was basically no different than buying a 110v kettle.
Technically it wouldn’t be to us code. It would be way smarter to just install a NEMA outlet and use an adapter, or even better just replace the plug on the kettle.
American wiring is center-tapped ~240V; typical 120V outlets are from line on either side of the tap to the neutral, while dryers, stoves, etc. are 240V line to line. So they would have wired it like a stove, but then put in a euro style plug instead of a stove plug
You just run 220 from the panel to it. Almost every US house has 220 outlets for the dryer and stove anyhow. All you’re doing is using a different shaped plug, and like, wires are wires, they fit into a euro plug the same as they fit into a NEMA plug.
There is literally a kettle on the left lower side of the image (likely deliberately as it seems awkward having it in front of the air fryer like that)
Americans will do anything other than buy an electric kettle.
There’s literally the handle of an electric kettle on the left side.
No this is something far worse: someone in the UK whom has strayed from the light and committed heresy!
May the Tea Gods have mercy upon them, for I shall have none!
I am an American and i own an electric kettle and use it frequently. I switched to an electric kettle after accidentally turning my microwave into a smoke bomb when I put instant ramen in there and forgot to add the water. Now I only make instant ramen with hot water from a kettle or on the stove.
We have an electric kettle, husband uses it for instant coffee; before we got together he used the microwave to boil water. The kids use it for tea. I use it for hot water for Moka pot, boiling water for grits, whatever needs hot water.
Electric kettle, microwave, and coffee grinder are the only appliances that live on the kitchen counter, all the other things are in the pantry.
OOP uses centigrade and spells color as “colour”; they’re probably not American.
And you call Celsius centigrade, which means you’re probably not young.
Implying Americans know what the metric system is.
I’ve heard electric kettles are slower here because of the limits of our electrical system. I do have a kettle for the stove, though. I also rarely drink tea.
Standard outlets in the USA are 120v at 15A (1800W max peak, 1440W max continuous). In comparison, standard UK outlets are 230v at 13A (2990W peak)
This also affects other things. For example, standard electric heaters (resistive heat) can’t get as hot in the USA.
Due to a quirk of unifying 2 standards, Europe and the UK, the range is 216.2 volts to 253.0 volts.
That encompasses infrastructure built to a tighter tolerance around 220V in Europe and infrastructure built to a tighter tolerance around 240V in the UK (and Australia).
We expect 3150W out of a kettle most of the time. Our heaters will say 3kW.
Usually you’ll find a few volts over 240 out of our outlets and that’s to design spec.
That’s true, because you use a 110V based system you have less power available to the kettle. It’s still a lot faster than an electric stove though. Not faster than an induction stove, probably.
We have a 2 phase, 120v or 240v. Standard wall outlets only have 1 phase at 120v and a 15amp limit.
Residential service is a single split 240v phase off of a 480V 3-phase line, while something like an apartment is 2 phase 208Y, with a single phase is 120V.
3 phase 208. But I imagine you know that, and just fat fingered the wrong key
Ah, I guess I meant that you’re getting 2 of the 3 phases, which is 208V phase-to-phase, or 120V phase to neutral.
My friends just put a euro style 220 outlet on their counter and ordered a kettle online. Since they were building the house new it was basically no different than buying a 110v kettle.
You can install a European outlet in a US home? How is it compatible?
Technically it wouldn’t be to us code. It would be way smarter to just install a NEMA outlet and use an adapter, or even better just replace the plug on the kettle.
American wiring is center-tapped ~240V; typical 120V outlets are from line on either side of the tap to the neutral, while dryers, stoves, etc. are 240V line to line. So they would have wired it like a stove, but then put in a euro style plug instead of a stove plug
You just run 220 from the panel to it. Almost every US house has 220 outlets for the dryer and stove anyhow. All you’re doing is using a different shaped plug, and like, wires are wires, they fit into a euro plug the same as they fit into a NEMA plug.
my electric kettle takes maybe 20 seconds to get to boiling water here in the USA
They’re still tons faster than a stove. Well, an induction stove might beat them.
There is literally a kettle on the left lower side of the image (likely deliberately as it seems awkward having it in front of the air fryer like that)
in my experience, it is quite hard to find a place for a kettle that isn’t at least a little awkward
this. they are always in the way and fit nowhere.
As opposed to an air fryer, which is a way better use than the food prep space it takes up?
Americans who drink hot tea have them (source: have had one for like 20 years).
Americans in general are just more hot coffee cold tea people. Exceptions abound of course, but in generalities.
I drink hot tea and cold coffee lol. I also drink hot coffee though.
We have replaced your American passport with Vietnamese to better accommodate your beverage preferences, please enjoy your new citizenship.
Pourover coffee is the shit though